ITeye博客

tonydlut的博客

tonydlut · 共 23 篇文章

Writing your own Java application on Exalogic using SDP

I've written before about how Exalogic enables Oracle Middleware products to use Sockets Direct Protocol (SDP) under the covers, rather than TCP-IP, to achieve lower latency communication over an InfiniBand network. Originally, the capability to leverage SDP was limited to Oracle internal-only APIs…

2016-05-01 14:32 · Exalogic相关 · 评论(0)

Exalogic Software Optimisations

For version 1.0 of Exalogic there is a number of Exalogic-specific enhancements and optimisations that have been made to the Oracle Application Grid middleware products, specifically: the WebLogic application server product; the JRockit Java Virtual Machine (JVM) product; the Coherence in-memory cl…

2016-05-01 14:26 · Exalogic相关 · 评论(0)

XA and NON-XA

Xa resource is used where there is a distributed transaction is required. ============================================== According to my knowledge XA drivers are used for globule transaction..and non XA drivers are used for local transaction.. =======================================================…

2016-04-29 16:04 · 评论(0)

Link aggregation

In computer networking , the term link aggregation applies to various methods of combining ( aggregating ) multiple network connections in parallel in order to increase throughput beyond what a single connection could sustain, and to provide redundancy in case one of the links should fail. A LAG (L…

2016-03-30 00:39 · 网络基础 · 评论(0)

Weblogic Muxer Thread

1 Weblogic Muxer Socket Thread Weblogic has Thread group called ‘Weblogic Muxer’, once you take thread dumps you could see always 4-8 running Muxer Threads e.g. ExecuteThread: '3' for queue: 'weblogic.socket.Muxer Muxer threads plays very important role when your Production environment struggling w…

2015-07-09 16:15 · weblogic基础 · 评论(0)

How to find Oracle WebLogic Server Version ?

Use one of the following methods to find Oracle WebLogic Server version 1. From registry.xml in MW_HOME Go to Middleware Home under which WebLogic is installed and look for file registry.xml Open registry.xml and search for “ component name=”WebLogic Server” ” version=”10.3.3.0″ (variable version n…

2015-01-12 00:40 · weblogic基础 · 评论(0)

ZFS on Linux

转:http://www.andybotting.com/zfs-on-linux ZFS is a fantastic filesystem developed by Sun. Compared to other filesystems, it’s quite interesting as it combines both a filesystem and a logical volume manager. This allows you to get great flexibility, features and performance. It supports things like …

2015-01-02 21:56 · Linux · 评论(0)

LVM snapshots explained

This article explains how LVM snapshots work and what the advantage of read/write snapshots is. We will go through a simple example to illustrate our explanation. First, create a dummy device that we will initialize as a PV: # dd if=/dev/zero of=dummydevice bs=8192 count=131072 # losetup /dev/loop0…

2014-12-31 01:40 · Linux · 评论(0)

CentOS 6.3下配置软RAID(Software RAID)

一、RAID 简介 RAID 是英文Redundant Array of Independent Disks 的缩写,翻译成中文意思是“独立磁盘冗余阵列”,有时也简称磁盘阵列(Disk Array)。 简单的说,RAID是一种把多块独立的硬盘(物理硬盘)按不同的方式组合起来形成一个硬盘组(逻辑硬盘),从而提供比单个硬盘更高的存储性能和提供数据备份的技术。 组成磁盘阵列的不同方式称为RAID级别(RAID Levels),常见的RAID Level 包括raid0, raid1, raid5, raid10。各level 对比如下: RAID等级 最少硬盘 最大容错 可用容量 读取性能 写入性…

2014-12-30 14:54 · Linux · 评论(0)

CentOS 6.3下配置LVM(逻辑卷管理)

一、简介 LVM是逻辑盘卷管理(Logical Volume Manager)的简称,它是Linux环境下对磁盘分区进行管理的一种机制,LVM是建立在硬盘和分区之上的一个逻辑层,来提高磁盘分区管理的灵活性。 LVM的工作原理其实很简单,它就是通过将底层的物理硬盘抽象的封装起来,然后以逻辑卷的方式呈现给上层应用。在传统的磁盘管理机制中,我们的上层应用是直接访问文件系统,从而对底层的物理硬盘进行读取,而在LVM中,其通过对底层的硬盘进行封装,当我们对底层的物理硬盘进行操作时,其不再是针对于分区进行操作,而是通过一个叫做逻辑卷的东西来对其进行底层的磁盘管理操作。比如说我增加一个物理硬盘,这个时候上…

2014-12-30 14:51 · Linux · 评论(0)

linux 路由表 的一些相关资料

=============================================================================== linux 路由表维护 查看 Linux 内核路由表 使用下面的 route 命令可以查看 Linux 内核路由表。 # route Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.0.0 * 255.255.255.0 U 0 0 0 eth0 169.254.0.0 * 255.255.0.0 U 0 0 0 eth0 default 192.168.0…

2014-10-11 19:43 · 网络基础 · 评论(0)

公钥、私钥、数字证书的概念

【转至】http://blog.csdn.net/turui/article/details/2048582 一直以来对公钥和私钥都理解得不是很透彻,感觉到模棱两可。今天在网上找了半天,通过查看对这个密钥对的理解,总算弄清楚了。 公钥和私钥就是俗称的不对称加密方式,是从以前的对称加密(使用用户名与密码)方式的提高。用电子邮件的方式说明一下原理。 使用公钥与私钥的目的就是实现安全的电子邮件,必须实现如下目的: 1. 我发送给你的内容必须加密,在邮件的传输过程中不能被别人看到。 2. 必须保证是我发送的邮件,不是别人冒充我的。 要达到这样的目标必须发送邮件的两人都有公钥和私钥。 公钥,就是给大家…

2012-11-27 00:32 · SSL相关 · 评论(0)

HTTP报头研究

HTTP(HyperTextTransferProtocol)是超文本传输协议的缩写,它用于传送WWW方式的数据,关于HTTP协议的详细内容请参 考RFC2616。HTTP协议采用了请求/响应模型。客户端向服务器发送一个请求,请求头包含请求的方法、URI、协议版本、以及包含请求修饰符、客户 信息和内容的类似于MIME的消息结构。服务器以一个状态行作为响应,相应的内容包括消息协议的版本,成功或者错误编码加上包含服务器信息、实体元信息以 及可能的实体内容。 通常HTTP消息包括客户机向服务器的请求消息和服务器向客户机的响应消息。这两种类型的消息由一个起始行,一个或者多个 头域,一个只是头域结束的…

2012-08-07 14:48 · 网络基础 · 评论(0)

WebLogic 10.3.4新功能:Gridlink Data Source

在WebLogic 10.3.4中,为了增强对RAC的支持,Oracle推出了Gridlink Data Source,取代原先的Multi Data Source: http://download.oracle.com/docs/cd/E17904_01/web.1111/e13737/jdbc_intro.htm#BHCBACAG Enhanced Oracle RAC Support This release provides a new data source type, a GridLink Data Source, to provide enhanced support for …

2012-02-25 14:58 · Oracle数据库 · 评论(0)

一个weblogic的好的博客

http://maping930883.blogspot.com/2009_03_01_archive.html

2011-12-18 23:10 · 评论(0)